APG FRANCE, systèmes de sonorisation professionels
Choose FrenchChoose englishChoose Spanish

Isoline

The Isoline series includes line array and line source systems using the exclusive APG’s Isotop™ technology. These systems are intended for high precision FOH applications.
The first system of this Isoline series is the UNILINE system. It consists in the combination of four speakers: the UL210 main speaker, the UL210D “downfill” speaker, the UL115B bass speaker and the UL118B subwoofer.

The UL210 is fitted with two 10" cone drivers and one Isotop10™ providing a constant directivity of 85° in the horizontal plane. The UL210D uses the same internal components and technologies but loaded with a different frontal horn in order to tune the horizontal coverage at 105°. UL210 and UL210D speakers use an identical Isotop10TM mid-high driver to guaranty a perfect acoustic coupling when both speakers are combined together. The UL115B is the dedicated bass speaker which allows low frequency extension of UL210 and UL210D. The UL118B subwoofer allows the extension of bandwith down to the infrabass. For that, UL115B and UL118B features identical ergonomics and compatible rigging hardware.

infosplus

References UL210 UL210D UL115B UL118B
Acoustic way / Mode 3 way  / bi amp 3 way  / bi amp 1 way / mono amp 1 way / mono amp
Transducer (Ø coil) 2x10"ND (3")** 1xIsotop™ 2x10"ND (3")** 1xIsotop™ 1x15"ND (4")** 1x18"ND (4")**

* full range mode with processor
** ND = magnetic neodimuim compression driver

UL210

ul210

ul210d1

ul210d2

ul210d3

Benefits

  1. Exclusive Isotop™ technology
  2. Real horizontal constant directivity
  3. Very low distortion
  4. Exceptional size-to-SPL ratio
  5. Integrated, intuitive, safe rigging system
  6. Transportation with multi-speaker dollies
  7. Exceptional modularity with UL115B speaker

Applications

  1. High power sound system
  2. High precision sound reproduction
  3. Wide and homogenous acoustic coverage
  4. Mid range to long throw (80m outdoor)
  5. Fixed or temporary installation, touring

Line array speaker - UNILINE
system 2-way active, vented cabinet
2 x 10" Nd, 1 x isotop10™ driver

The UL210 is the "line array" speaker of the UNILINE system which also comprises the dedicated UL115B bass speaker. UNILINE has been developed as a very high precision and highly modular system. From an acoustic point of view, APG's Isotop™ technology generates an increasing vertical directivity index sound field in the mid-high range from 450 Hz to 19 kHz. This results in flawless line source coupling, which in turn makes UNILINE perfectly adapted to all applications from short to very long throw applications.

The UNILINE can be used in 3 modes. In "standalone" mode, UL210 is ideal for medium power broadband voice and music applications. In "extended" mode, UL210 is combined with UL115B or with a subwoofer for high power music applications. In "complete mode", UL210 is combined with UL115B and infra bass subwoofers for very high power and live music applications.

Handling and transport features are designed to reduce significantly rigging time with still providing maximum security.

UNILINE can be used with only three UL210 speakers for small venues. The rigging system is designed to fly up to twenty-four UL210 speakers to cover (with high power) large venues or outdoor spaces. A wide variety of UL210/UL115B configurations are possible thanks to the modularity of the system, either flown or stacked, which offers a virtually unlimited number of combinations for optimal coverage of just about any site.

A preset bank is available for the digital processors DMS26.

Download Technical data sheet UL210
Download Technical brochure UL210
References UL210
Acoustic way  / Mode 3 way  / bi amp
Transducer (Ø coil) 2x10"ND (3")**                   1xIsotop™
Bandwidth (+/- 3dB) 60Hz - 19kHz*
Directivity @ -6dB 90°H x 10°V
Nominal impedance 2 x 16 Ohms
Power AES lo : 800W                            mid/hi : 300W
Recommended amplification lo : 500 to 1200W         mid/hi : 200 to 450W
Efficiency dB SPL @ 1W/1m lo : 101                            mid/hi : 108
Continuous dB SPL level @ 1m 131
dB SPL max level @ 1m 137
Dimensions (H,L,P) 264 x 684 x 607 mm
Weight 99 lb (45 kg)

* full range mode with processor
** ND magnetic neodimuim compression driver

Download the Uniline Solution section of our full line catalogue 2013

UL210D

ul210d

ul210dd1

ul210dd2

ul210dd3

Benefits

  1. Wide acoustic coverage (105°)
  2. Same Isotop™ engine as UL210
  3. Very low distortion
  4. Light weight
  5. Integrated rigging system (same as UL210)
  6. Dedicated transport dollies and flight cases
  7. Compatible with UL210 and UL155B

Applications

  1. Downfill speaker
  2. Short or medium throw acoustic coverage
  3. Fixed or temporary installations
  4. Touring

"Down fill" speaker - UNILINE system
2-way active, vented cabinet
2 x 10" Nd, 1 x isotop10™ driver

The UL210D speaker is the dedicated downfill speaker of the UNILINE system, to be used in conjunction with the UL210 line array speaker and the UL1115B dedicated bass speaker. With these three elements, the UNILINE system offers a very high degree of modularity : a large number of possible combinations means that the system can be configured to suit almost any application in any venue.

The UL210D speaker uses the same Isotop™ engine (450Hz - 19kHz) as the UL210 to ensure perfect sonic compatibility throughout the frequency range. The "line source" type coupling is therefore guaranteed.

The UL210D is designed and optimized for downfill use, as a complement to a main UL210 speaker cluster. From an acoustic point of view, the horizontal opening achieves up to 105° of constant directivity up to the extreme highs. Due to the wider opening, the acoustic performance is reduced, compared to the UL210. However, the result is a significant optimization of the power/size ratio.

The rigging system is identical to the UL210 and the transport systems (dollies and flight cases) are also fully compatible. The UL210D can be configured from 1 to 4 units at the bottom of a UL210 cluster, depending on the coverage required.

The modularity of the system enables all types of configurations combining UL210/UL210D/UL115B, flown or stacked.

A library of presets and suggested configurations is provided for the DMS26 digital processors.

Download Technical data sheet UL210D
Download Technical brochure UL210D
References UL210D
Acoustic way  / Mode 3 way  / bi amp
Transducer (Ø coil) 2x10"ND (2")**                   1xIsotop™
Bandwidth (+/- 3dB) 80Hz - 19kHz*
Directivity @ -6dB 105°H x 10°V
Nominal impedance 2 x 8 Ohms
Power AES lo : 400W                            mid/hi : 300W
Recommended amplification lo : 300 to 800W         mid/hi : 200 to 600W
Efficiency dB SPL @ 1W/1m lo : 101 mid/hi : 105
Continuous dB SPL level @ 1m 127
dB SPL max level @ 1m 133
Dimensions (H,L,P) 264 x 700 x 584 mm
Weight 34 kg

* full range mode with processor
** ND magnetic neodimuim compression driver

Download the Uniline Solution section of our full line catalogue 2013

UL115B

ul115b

ul115bd1

ul115bd2

ul115bd3

Benefits

  1. Complex horn loaded band pass
  2. High SPL capacity
  3. Integrated rigging system
  4. Multi-speaker dolly transportation
  5. Cardioid configuration possible

Applications

  1. UNILINE configurations
  2. Flown low frequency system
  3. Cardioïd pattern control
  4. Touring

Bass speaker - UNILINE system
1 x 15" Nd, single K-Horn™ load

The UL115B is the dedicated bass speaker of the UNILINE system which also comprises the UL210/D "line array" speakers. It contains a single high power 15" neodymium driver mounted in a double chamber band-pass speaker enclosure. The front chamber opens onto a K-Horn™ design. This complex design provides an optimal efficiency gain as well as excellent control over the diaphragm displacement.

This combination results in a superior dynamic capacity and an SPL gain of over 6 dB compared to a traditional direct-radiating vented enclosure. The UL115B subwoofer has been designed for low frequency reinforcement from 45 - 180 Hz. The frequency cross-over with UL210/D is tuned between 80 Hz and 110 Hz depending on configuration. It is possible to extend LF still further by using the TB118S or TB218S subwoofers.

In applications where the bass speakers do not need to be flown, the UL115B can be replaced by APG TB115S or TB215S subwoofers. In venues or sites where speakers must be flown, it is possible to replace a classical subwoofer by a UL115B bass speaker.

All speakers are K-Horn-loaded, thus ensuring perfect compatibility, whatever the combination.

The ergonomic 4-point rigging system makes it easy to fly or groundstack the UL115B. Cardioid configurations are also made possible thanks to this system, and a Speakon™ connector on the front makes cabling quick and easy.

Download Technical data sheet UL115B
Download Technical brochure UL115B
References UL115B
Acoustic way  / Mode 1 way  / mono amp
Transducer (Ø coil) 1 x 15" Nd** (4")**
Bandwidth (+/- 3dB) 45 - 100Hz*
Directivity @ -6dB 270°
Nominal impedance 8 Ohms
Power AES 1150W
Recommended amplification 1150 à 2300W
Efficiency dB SPL @ 1W/1m 102
Continuous dB SPL level @ 1m 132
dB SPL max level @ 1m 138
Dimensions (H,L,P) 397 x 700 x 755 mm
Weight 99 lb (45 kg)

* full range mode with processor
** ND magnetic neodimuim compression driver

Download the Uniline Solution section of our full line catalogue 2013
Choose English language Choose French languageChoose Spanish
[ Home | Download Flash Player | Download Acrobat Reader | Report error ]